Coordination modes between copper(II) and N-acetylneuraminic (sialic) acid from a 2D-simulation analysis of EPR spectra. Implications for copper mediation of sialoglycoconjugate chemistry relevant to human biology

The equilibrium distribution of species formed between Cu(II) and N-acetylneuraminic (sialic) acid (I, LH) at 298 K has been determined using a two-dimensional (2D) simulation analysis of electron paramagnetic resonance (EPR) spectra. In acidic solutions (pH values < 4), the major species present are Cu(2+), [CuL]+ [logbeta = 1.64(4)], and [CuL2] [logbeta = 2.77(5)]. At intermediate pH values (4.0 < pH < 7.5), [CuL2H-1]- [logbeta = -2.72(7)] and two isomers of [CuLH-1] [logbeta (overall) = -3.37(2)] are present. At alkaline pH values (7.5 < pH < 11), the major species present is [CuL2H-2]2-, modeled as three isomers with unique giso and Aiso values [logbeta (overall) = -8.68(3)]. Two further species ([CuLH-3]2- and [CuL2H-3]3-) appear at pH values > 11. It is proposed that [CuL]+ most likely features I coordinated via the deprotonated carboxylic acid group (O1) and the endocyclic oxygen atom (OR) forming a five-membered chelate ring. Select Cu(II)-I species of the form [CuLH-1] may feature I acting as a dianionic tridentate chelate, via oxygen atoms derived from O1, OR, and one deprotonated hydroxy group (O7 or O8) from the glycerol tail. Alternatively, I may coordinate Cu(II) in a bidentate fashion as the tert-2-hydroxycarboxylato (O1,O2) dianion. Spectra predicted for Cu(II)-I complexes in which I is coordinated in either a O1,OR {I1-} or O1,O2 {I2-} bidentate fashion {e.g., [CuL]+ (O1,O R), [CuL2] (bis-O1,O R), [CuLH-1] (isomer: O1, O2), [CuL2H-1]- (O1, O R; O1, O2), and [CuL2H-2]2- (isomer: bis-O1, O2)} have "irregular" EPR spectra that are ascribed to the existence of Cu(II)-I(monomer) <==> Cu(II)-I(polymer) equilibria. The formation of polymeric Cu(II)-I species will be favored in these complexes because the glycerol-derived hydroxyl groups at the complex periphery (O, 7O, 8O9) are available for further Cu(II) binding. The presence of polymeric Cu(II)-I species is supported by EPR spectral data from solutions of Cu(II) and the homopolymer of I, colominic acid (Ipoly). Conversely, spectra predicted for Cu(II)-I complexes where I is coordinated in a {I2-} tridentate {e.g., [CuLH-1] (isomer: O1, O R, O7, or O8) and [CuL2H-2]2- (isomer: bis-O1,O R,O7, or O8)} or tetradentate fashion {I3-} {e.g., [CuLH-3]2- (O1, O R, O, 8O9)} are typical for mononuclear tetragonally elongated Cu(II) octahedra. In this latter series of complexes, the tendency toward the formation of polymeric Cu(II)-I analogues is small because the polydentate I effectively wraps up the mononuclear Cu(II) center. This work shows that Cu(II) could potentially mediate the chemistry of sialoglycoconjugate-containing proteins in human biology, such as the sialylated amyloid precursor protein of relevance to Alzheimer's disease.     

Measurement of the carbonaceous component in the Milan urban particulate matter

The carbonaceous component in the Milan urban particulate matter, i.e. the two components black carbon (BC) and organic carbon (OC), has been measured by means of a thermogravimetric analyzer combined with an infrared spectrophotometer (TGA/FT-IR). While black carbon may be considered a primary pollutant, organic carbon includes both primary emissions and secondary organic aerosols. Since carbonaceous aerosol (including a small quantity of inorganic carbon, too) makes up roughly from 25% to 50% of the average annual PM 2.5 mass concentration, a deeper understanding of this component is required. The TGA/FT-IR technique, employed for the first time to our knowledge for the quantification of the particulate matter carbonaceous component, allows, thought the results here presented are preliminary, to assess the two components BC and OC in a simple way especially if compared with the methods reported in the literature. The total carbon (TC) determinations performed by TGA/FT-IR on Milan urban particulate matter are in good agreement with the results obtained by a total organic carbon (TOC) analyzer operating directly on the solid sample.     

Electrocatalytic reduction of ROOH by iron porphyrins

Electrocatalytic reduction of a series of chemical oxidants of different power (tert-butyl hydroperoxide, potassium peroxomonosulfate, peracetic acid, and m-chloroperbenzoic acid) at iron-porphyrin-modified graphite electrodes is studied in buffered aqueous solutions by rotating disk and ring-disk voltammetry. Both ferric and ferrous porphyrins are catalytically active. Turnover of ferric catalysts is slower than that of the ferrous analogues and involves competing catalytic reduction and disproportionation. The kinetic data are consistent with reactant binding being the rate-determining step in catalysis by Fe(III). In catalysis by Fe(II), the turnover is controlled by the first electron transfer. The covalently linked proximal imidazole ligand is found to be crucial for achieving the Fe(III) catalysis.     

A new thermoelectric material: CsBi4Te6

The highly anisotropic material CsBi(4)Te(6) was prepared by the reaction of Cs/Bi(2)Te(3) around 600 degrees C. The compound crystallizes in the monoclinic space group C2/m with a = 51.9205(8) A, b = 4.4025(1) A, c = 14.5118(3) A, beta = 101.480(1) degrees, V = 3250.75(11) A(3), and Z = 8. The final R values are R(1) = 0.0585 and wR(2) = 0.1127 for all data. The compound has a 2-D structure composed of NaCl-type [Bi(4)Te(6)] anionic layers and Cs(+) ions residing between the layers. The [Bi(4)Te(6)] layers are interconnected by Bi-Bi bonds at a distance of 3.2383(10) A. This material is a narrow gap semiconductor. Optimization studies on the thermoelectric properties with a variety of doping agents show that the electrical properties of CsBi(4)Te(6) can be tuned to yield an optimized thermoelectric material which is promising for low-temperature applications. SbI(3) doping resulted in p-type behavior and a maximum power factor of 51.5 microW/cm.K(2) at 184 K and the corresponding ZT of 0.82 at 225 K. The highest power factor of 59.8 microW/cm.K(2) at 151 K was obtained from 0.06% Sb-doped material. We report here the synthesis, physicochemical properties, doping characteristics, charge-transport properties, and thermal conductivity. Also presented are studies on n-type CsBi(4)Te(6) and comparisons to those of p-type.     

Long-range dispersion coefficients for like centrosymmetric linear molecules and an application to H2-H2

The real spherical tensor theory of long-range intermolecular coefficients developed in previous papers is applied to derive explicit formulae for the first three dispersion coefficients for like centrosymmetric linear molecules. The expansion of angle-dependent coefficients in associated Legendre polynomials allows one to identify the isotropic and anisotropic components of the dispersion interaction in terms of London dispersion constants, the treatment of higher coefficients being simplified by the coupling of the elementary (l, l′)-polarizations to resultant angular momenta L_A and L_B onto each molecule. The contributions from all coupling schemes are given explicitly for C₆, C₈, C₁₀, and numerical results are presented for H₂-H₂ using two-term reduced spectra values from the Kaiserlautern group.     

Synthesis of 1-(4-substituted)benzyl-6-hydroxyisoquinolines with potential activity on NA+,K+-atpase

The synthesis of 1-(4-substituted)benzyl-6-hydroxyisoquinolines, to be evaluated in the displacement of the specific ³H-ouabain binding to Na⁺,K⁺-ATPase, is described. The key step involved a cyclization to the isoquinoline ring under Pictet-Gams conditions which was best performed with the 6-hydroxy group protected as the benzyl ether. When an unsaturated ester group was present in position 4 of the 1-benzyl group, this was best introduced before the cyclization step, since the IIeck reaction on 1-(4-bromobenzyl)-6-hydroxyisoquinoline ( 8 ) with acrylic acid derivatives was not successful in all cases.     

The effect of composition of parenteral solution on the thermal resistance of Bacillus stearothermophilus and Bacillus subtilis spores

Large-volume parenteral solutions were submitted to heat treatments after being inoculated with Bacillus stearothermophilus ATCC 7953 (T _r =121°C) and Bacillus subtilis ATCC 9372 (T _r =104.5°C) spores. The average decimal reduction time for B. stearothermophilus ranged from a D _121°C value of 1.31 to 3.14 min, in glucophysiologic and Ringer’s solutions respectively. For B. subtilis, D _104.5°C value increased from 0.69 to 1.37 min, in Ringer’s (pH=5.91) and 50% glucose (pH 3.05) solutions respectively. The z value ranged from 7.95°C (20% mannitol solution) to 13.14°C (50% glucose solution), corresponding to an activation energy (Ea) of 81.48 and 49.30 kcal/mol, respectively.     

Gauge theory of fermions onR × S 3 spacetime

A Lorentz-invariant gauge theory for massive fermions on R × S ³ spacetime is built up. Using the symmetry of S ³,we obtain Dirac-type equation and derive the expression of the fermionic propagator. Finally, starting from the SU(N) gauge-invariant Lagrangian, we obtain the set of Dirac-Yang-Mills equations on R × S ³ spacetime, pointing out major differences from the Minkowskian case.     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

Determination of diamine oxidase by a kinetic method with 2,2''-azino-di(3-ethylbenzthiazoline-6-sulfonate)

Hydrogen peroxide, the product of diamine oxidase-catalyzed putrescine or cadaverine oxidation, formed in proportion to the enzyme activity, is measured spectrophotometrically by using the above sulfonate (ABTS) and peroxidase. Only one reagent solution containing 3 mmol of putrescine or 10 mmol of cadaverine, 4 mmol of ABTS and 3000 U of peroxidase per litre of 0.2 mol l^-1 Tris—0.1 mol l^-1 HCl buffer pH 7.5 is needed. Absorbance changes are measured at 410 nm over the first 3 min of the reaction. This initial oxidation rate of the chromogen enables diamine oxidase activity up to 230 U l^-1 to be determined.